Images

ERV-G 150.TW, ERV-G 80.TW

Aircraft refueller

PHD 100, airport depot

ZVF 50 JET

Oasis TM106 Trailer Unloading Manifold, for CNG

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ZVA Slimline 2 for aircraft refuelling

black plastic cover (scuffguard), Sight Glass, dust cap and ground cable assembly

Oasis IV 108 Inline Trailer Breakaway, for CNG

Transport protection for threaded fittings

MB 50 SS

Dust cap for VK 50, stainless steel

DDC-M 80 SS; SG 3", VC 75-3, Elaflon FEP 75, DDC-K 3" SS ADR

Epoxy resin loading with Dry Disconnect Coupling, sight glass and FEP universal hose. DDC cap with pressure relief at container tank outlet.

V 16-3/4"

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, yellow.

SG-COAX_Al

Sight Glass, to EN 13617-1, for ZVA Slimline 2 GR with vapour recovery. Installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised fuels.

ZVF 50 JET overwing refuelling

with HD-C hose assembly

Nozzle boot NB-ZVF 50 SR

for ZVF 50 Oberflügel-Zapfventile, with Spout Retainer

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, vent hose assenbly with 'VC-LNG'

Slimline 16 green

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360.

Elaflex Hamburg

Assembling cell dispensing hoses

H2 Hydrogen

H2 25 D Hydrogen hose, SFC 25, MX 25, VC 25

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).